|
Aerocool Modern-V Fan Controller Review
The technical data ...
Dimensions:
The overall height is 86 mm, the width is 150 mm and the depth is 65 mm.
The diagonal of the color LCD is about 135mm.
Weight and material:
The weight of the plastic fan controller is approx. 250 gram including cables.
Drive bays:
There are 2x 5.25 inch bays necessary for the assembly.
Fan controls:
4x fans can be controlled with up to 6 Watt each (approx. 0.5 Ampere at 12 Volt) according to Aerocool.
The cable of the four 3-pin fan connectors is about 70cm, whereby the fans have the following names:
Fan 1 = CPU, Fan 2 = VGA, Fan 3 = HDD and Fan 4 = System.
The operating range is specified in percent: between 60% (+100 rpm) and 90% of the fan speed.
Temperature Sensors:
The cable of the four foil sensors is about 70cm, whereby the temperature sensors have the following names:
Sensor 1 = CPU, Sensor 2 = VGA, Sensor 3 = HDD and Sensor 4 = System.
The temperature range of the bargraph is between 35°C and 70° Celsius (95-157 Fahrenheit) and the
adjustable alarm range is between 25°C and 95°C.
Miscellaneous:
It is possible to set the temperature display to Celsius or Fahrenheit.
The maximum measured operating range was up to 11.86V at 12.02V operating voltage.
A Piezo buzzer is used for the alarm output, but it cannot be deactivated.
A picture of the cooled B772L transistors:
All pictures and article are subject to the copyright 2008 of www.ocinside.de
|