Layout, design and features …
With the BioniX P Series, Arctic is once again introducing a new and modern premium fan to the market, one that offers a few practical additional features compared to the well-known P Series fans. In terms of performance, the BioniX P fans deliver top-notch results. With seven strongly curved blades, the BioniX P12 and BioniX P14 generate not only a substantial airflow at up to 3,000 RPM and 2,500 RPM, respectively, but also a remarkable static pressure of 6.7 mmH₂O (P12) and 5.4 mmH₂O (P14). To achieve this, the BioniX P12 draws 0.34 A and the BioniX P14 draws 0.39 A, putting them practically on par with Arctic’s P12-Pro and P14-Pro. In terms of performance, the new BioniX fan makes no compromises and, when properly controlled, creates a stormy environment inside the PC case! For silent applications, the PWM controller offers a 0-RPM mode ranging from 0–5% PWM. The minimum speed is 450 RPM for the BioniX P12 and 400 RPM for the BioniX P14. Rubber elements around the screw holes further reduce the already minimal vibrations of the fluid-damped rotor. This makes the new BioniX fans suitable for every conceivable PC application.

When it comes to RGB lighting, Arctic has really stepped it up with the BioniX P fan, increasing the number of LEDs from 12 to 16. The power consumption for the LEDs has even risen by 50%, from 0.4A to 0.6A, which is why the new BioniX fans offer significantly more brightness than the standard P fans. Furthermore, the light is not only emitted by the fan blade itself but is also dispersed laterally via additional diffusers on two opposite sides of the frame.

Attentive viewers of the previous images will have noticed that no cables were visible. This is because the new BioniX P fans do not have integrated connection cables. Instead, each side of the frame without an RGB diffuser features two distinctive slots. One of the two slots is marked with arrows and indicates the slot with electrical contacts.

A jumper, a connecting cable, or a connection cable can be inserted into the slots. The second slot serves as an additional mechanical connection when connecting two fans via the jumpers, to increase stability. All electrical signals-for both the fan and the RGB lighting-are transmitted through each of the three connection points. This provides a wide range of options for efficiently connecting multiple BioniX fans without having to hide a massive tangle of cables inside the PC case afterward.

For example, a fan on the back of the case can be connected via the cable to a pair of fans in the top of the case that are already directly linked via jumpers. All three fans can then be connected to the motherboard or a fan controller via a single connection cable, each with a connector for the fan (4-pin PWM) and RGB lighting (3-pin aRGB).

Arctic BioniX P12/P14 A-RGB Installation and Practical testing…