Get the cheapest IDE-RAID controller:

It's easy to modify your Promise Ultra66 pci controller card to the much
more expensive FastTrack66 RAID card !
I couldn't believe it, but it's running without any rate of losses!
Naturally we do not take any responsibility for destruction, warranty claims, etc..
Before !!! you begin to solder something download firmware and upgrade it.

There are 2 different methods,
- whereby the method of this homepage is somewhat simpler,
because you only have to upgrade the FlashROM and solder one 100 ohms resistance
from ground to pin 23 of the Flash ROM.

- during the guidance of this homepage it is necessary to out-solder the EEPROM
to solder a SMD resistance.
However both conversion instructions have the same effect and will double your harddisk transfer rate !!!

Here's the controller without modificationHere i had already soldered the resistor from ground to pin 23

Discuss in our forum ...

back to top